| Books and Videos
 Metal
Fabricator' Handbook, Fournier, Basic tool selection and use,
MIG, TIG, Arc and gas welding, fuel and oil tanks, exhaust headers, roll
bars and roll cages. Basic metal shaping. 175 pages
step-by-step photos #WFMFB00 $23.95 |
 Sheet
Metal Handbook, Fournier, Tips on setting up your own shop,
proper use of the English wheel, basic metal techniques, hammer forming,
riveting and restoring original sheet metal. 144 pages with
step-by-step photos #WFSMB00 $19.95 |
 Metal
Work Basics: Hand Tools, DVD Video, A comprehensive
introduction to metal work by master Ron Fournier. Hammers,
dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers. 90 minutes #WFHTV00 $35.00 |
| Metal Working Basics: Large Equipment,
DVD Video. Instruction and demonstration by Ron Fournier.
Sheet metal brakes, sheet metal, band saws, sanders, drill press and
rotary machines. 90 minutes #WFLEV00 $35.00 |
| Sheet Metal Shaping: Blocking &
Smoothing Techniques. DVD Video by Ron Fournier. Techniques of
blocking and smoothing aluminum using shot bags, mallets and slappers.
Final smoothing on the English wheel, Shapes include: patch apnels, car
fender, motorcycle fender and tear drop. 90 minutes #WFBSV00
$35.00 |
 Basic
Techniques For Working with Steel, DVD video by Ron Covell.
Ron demonstrates basic hammer and dolly techniques and shows hor to do
high level metal work. Rust repair, hole filling, patch panels,
tig welding, wired edges, metal finishing and shrinking. 100
minutes #WFBTS00 $40.00 |
| Bucks, Patterns and Forms, DVD Video,
Ron Fournier demonstrates building a fender buck. Topics include:
materials, fastening, stations 60 minutes #WFBPV00 $30.00 |
| English Wheel Techniques, DVD Video.
Ron Covell brings his signature easy to follow style using the English
wheel. From large cast iron machine to c-clamp machines. Ron
shows basic tracking patterns that are used to shape panels of various
sizes and configurations. Whether you are brand new to the English
wheel or an experienced user you will find lots of valuable information
in this video. #WFEWT00 $40.00 |
 Making
Motorcycle Gas Tanks, DVD Video. Ron Covell shows the
"intimate details" of making two different gas tanks. A flat
bottom steel chopper tank and a curved aluminum tank. 180 minutes
#WFMGV00 $60.00 |
| Welder's Hand Book, Richard Finch, Weld
like a pro! Covers Mig, Tig, Plasma-arc and Oxyacetylene welding.
Also coves jigs and fixtures. 160 pages with many illustrations
and clear photos. #WFWHB00 $23.95 |
| Motor Cycle Fabrication: from
Sheet to Street. 2 DVD Video Set. Watch master metal
fabricator Ron Fournier create custom motorcycle sheet metal parts from
scratch. Step-by-step aluminum tank, fender, sides and seat pan.
"Tricks of the Trade". Demonstrations includes planning, patterns,
buck design, blocking and sanding, English wheel, shrinking and
stretching, heliarc welding, finishing and final fit. 3 1/2 hours!
#WFMMF01 $68.00 |
DVD- TIG WELDING BASIC: 80
MINUTES. Ron Covell describes the complete welding process #DVD21 $38.00
|
| DVD- MIG WELDING MADE EASY: 70
MINUTES. Ron Covell step by step clear instructions from a master.
#DVD22 $38.00
|
| DVD- BODY PANEL REPLACEMENT: 152
MINUTES. Kevin Tetz. Covers vintage to late model partial and full
panels, welding, adhesives, rust issues and finishing. #DVDKT1 $40.00
|
| DVD- METAL PREP/RUST REPAIR: 55
MINUTES. Kevin Tetz. Covers stripping, light body work, dent repair,
patches and rust prevention. #DVDKZ2 $38.00
|
| DVD- BODY SHOP BASICS: 90
minutes. Kevin Tetz. Covers equipment, repairs, paint techniques, and
trouble shooting. #DVDKT4 $38.00
|
| DVD- COLOR SANDING & BUFFING: 55
MINUTES. Kevin Tetz. Instructions for after the new paint job, color
sanding, buffing, eliminate runs and defects. #DVDKT5 $38.00
|
| DVD- PAINT YOUR OWN CAR: 110
minutes Kevin Tetz. Kevin coaches you through the complete process, all
in a home garage. #DVDKT3 $38.00
|
|
|
