• Plate Bevelers for Weld Preparation

• Fast, Accurate Cutting and Easy Use

• Adjustable Bevel Angle 15-45 Degrees

• Special Design BALDOR 110 Volt Motor

• Uses Standard Square Carbide Inserts with 4 Cutting Edges

• Includes Carbide Cutters, Pipe Beveling Attachment, Bevel Lube and Instructions

• Bevel any Shape, Straight Edge or Contour Easily

• Bevel circles and Pipe

• Easy to Operate

• 1/8" Bevels in a Single Pass

• Adjustable Bevel Depth

• Bevel any Shape, Straight Edge or Contour Easily

• Bevel circles and Pipe

• Easy to Operate

• 1/8" Bevels in a Single Pass

• Adjustable Bevel Depth

• Up to 5/64" Bevels

• 11,000 RPM

• 1/2 HP - 8 CFM

** Shipping Quote Via Fed Ex Ground Anywhere in the Contiguous 48 States
     Outside of this area additional shipping fees are required and you will be notified
     upon receipt of order.  If you would like a quote prior to ordering call our office
     at 1-800-391-5419 and we will be happy to calculate shipping options.

Palmgren Model #82300

Palmgren's line up of edge finishing machines effectively deburr, chamfer and bevels edges on flat and square metals and plastics.

• Using a standard 7" abrasive flap disc. This tool makes short work deburring projects. The "go-to" machine for edge finishing. Bevel angle 45 degrees

• Minimum material thickness 1/8"

• Maximum bevel depth up to 1/8"

• 3/4 horsepower, 110 volt

• Paint colors vary

Palmgren Model #82304

Palmgren's line up of edge finishing machines effectively deburr, chamfer and bevels edges on flat and square metals and plastics.

• This tool utilizes a standard cup style grinding wheel for Deburring - Chamfering the edges of any ferrous material including heat hardened edges. Completed parts appear to have been precision finished on a surface grinder

• Bevel angle 45 degrees

• Minimum material thickness 1/8"

• Maximum bevel depth up to 1/8"

• 1/3 horsepower, 110 volt

• Paint colors may vary

• Make Fast and Clean 45 Degree Chamfers on any Material

• Adjustable Depth of Cut up to 1/8"

• Powerful 1/2 HP 110 Volt Motor

• Uses Standard 1/2" Square Carbide Inserts with 4 Cutting Edges

• Convenient ON-OFF Switch

• Chip Tray

• Hardened V- Block Plates

• Includes Carbide Cutters, Chamfer Lube and Instructions

• For Fast Grinding and sanding

• Surface belt speed is a whopping 7000 feet per minute

• Adjustable angle stand

• Top platen for flat work and small parts

• Adjustable work rest with eye shield

• Rubber front contact wheel for fastest stock removal

• 3 HP 220 Volt, 3 Phase

• Uses Standard 3" x 78 3/4" belt

• WFBG3

• Fast One-Pass Edging of Sheet Metal Parts at 10 Feet per Minute

• No More Scraping Sharp Edges

• Uses Standard 1/4" Shank Carbide Burr to Produce Consistent Chamfers

• Spindle Speed 55,000 RPMS

• Air Requirement 4-6 CFM @ 80-110 PSI  (1 HP Compressor)

• Maximum Depth of Cut 1/16"

• Includes Cutter, Wrenches and Instructions

• Ideal for DeBurring and Porting/Polishing

• Easy Belt Tracking

• Rear Exhaust

• Adjustable Handle Position

• Fast - 1600 RPM

• Requires 6 CFM

• Standard 1/2" x 13" Belts

• Contact Wheel, Platen and Work Support Grinding

• Slack Belt Grinding

• Adjustable Belt Tension

• Positive Belt Tracking

• Patented Design

• Quick Belt Change

• Large Throat Clearance for Enhanced Word Point Access

• Variable Speed 120/220 1 PH and 220/440 3 PH Options

• Precision Machined Cast Aluminum Frame

• Accepts Internal Grinding Attachments

• Accepts Nylon, Buffing, Wire and Fiber Wheels