Iron Workers and Punching

  • Shears up to 3/4" Rods, Rounds or Squares

  • Shears Angle Iron up to 2.25" x 3/16"

  • Shears T Iron up to 2.25"

  • 4" Long High Chrome Shear Blades

  • Adjustable Hold Downs

  • Cast Iron Frame

  • Gear Drive Cam

  • Weight 250 lbs

  • Throatless Shear Cuts up to 5/16" Plate

#WF1W Manual Iron Worker

Back Order

$495.99  

Call for Shipping Quote

We Know What We Sell - Call Us!
1-800-391-5419

  • 20 Tons of Punching Power

  • Includes FREE 1/2" Round Punch and Die

  • 2 1/4" Throat Depth

 

RW20 Super Heavy Duty Punch

$529.00
Shipping $18.00**
 

** Shipping Quote Via Fed Ex Ground Anywhere in the Contiguous 48 States
     Outside of this area additional shipping fees are required and you will be notified
     upon receipt of order.  If you would like a quote prior to ordering call our office
     at 1-800-391-5419 and we will be happy to calculate shipping options.

 


Click for a larger image

RW Roper Whitney Punch Kit
 

  • 1.2 Tons of Punching Power

  • Includes 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 9/32" Round Punches and Dies

  • Plastic Case

#RW5JR Kit RW Roper Whitney Punch Kit $82.99
Shipping $13.90**
 

 

#RW5JR

Bench Mount Stand

$43.99
Shipping $5.35 **

 

** Shipping Quote Via Fed Ex Ground Anywhere in the Contiguous 48 States
     Outside of this area additional shipping fees are required and you will be notified
     upon receipt of order.  If you would like a quote prior to ordering call our office
     at 1-800-391-5419 and we will be happy to calculate shipping options.

 

 

Punch Kit

  • Punch Holes up to 1/16" Think Mild Steel

  • 2" Throat Depth

  • Kit includes 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" and 9/32" Diameter Punches

  • Also includes Plastic Case

#WFPK15 Punch Kit  

$49.99
$13.90

 

 

  • 6.25" Throat Depth

  • Punch up to 3/16" thick steel

  • Gear Drive Cam = Less Effort Needed

  • Weight 200 lbs

  • Includes a complete set of punches - 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8"

#WFP20 Manual Punch $599.99
Call for shipping quote
 

EDWARDS 25 TON IRON WORKER

  • Punch, Notch, Shear, Bend all in One Machine

  • Punch up to 1" Hole in 5/16" Think Plate Like Butter

  • 220 Volt Single Phase Electric Available

#Edwards25T Edwards 25 Ton Iron Worker $4200.00
Call for shipping quote
 

 

EDWARDS 40TON IRON WORKER

  • Punch, Notch, Shear, Bend all in One Machine

  • Punch up to 1" Hole in 1/2" Think Plate Like Butter

  • 220 Volt Single Phase Electric Available

#Edwards40T Edwards 40 Ton Iron Worker $5800.00
Call for shipping quote
 

 

EDWARDS 110 TON IRON WORKER

  • TOP OF THE LINE

  • Punch, Notch, Shear, Bend all in One Machine

  • Punch up to 13/8" Hole in 1" Think Plate Like Butter

  • 220 Volt Single Phase Electric Available

#Edwards110T Edwards 110 Ton Iron Worker $18990.00
Call for shipping quote
 


 

Scotchman

Do 95/140-24m

Standard Features

*                            Dual operator allows for two operators to work at the same time at full capacity.

*                            95-ton punch station (1-3/16" in 1")

*                            Keyed punch ram for safety

*                            9" throat depth

*                            Punch gauging table with fence and scale

*                            Die holder complete with 2" die insert

*                            Punch nut with wrench

*                            Adjustable swing-away stripper

*                            One round punch & die: max. diameter 1-1/4"

*                            Punch jog control

*                            Two adjustable electric stroke controls with scale

*                            Two electric remote foot pedals

*                            Two 2-stage hydraulic pumps

*                            Two valves

*                            Angle shear capacity: 6" x 6" x 1/2" at 90°

*                            Notcher table with guides

*                            Rectangle notcher 3" x 4" x 1/2"

*                            140-ton, 24" flat bar shear with sabre blade

*                            Shear table with miter fence

*                            Tool table work area

*                            Slug receptacles

*                            Electrical box supplied with emergency palm button and lock-out tag-out accommodations

*                            230/460 volt / 3-ph electrics (must specify voltage)

*                            All guards necessary to comply with ANSI B 11-5 standards

*                            Forklift accommodations

*                            Warranty: Three Years

*                            Made in the USA

Capacities & Specifications

Rated on:

65,000 PSI Tensile

A 36 Mild Steel

Punching Capacity

95 ton
1-3/16" in 1"

86 mt
27 mm in 25 mm

Special Tooling

4" Max. Dia.

100 mm through 5.5 mm

Throat Depth

9"

225 mm

Flat Bar Shear
(sabre blade-std.)

140 ton
24" Length
1" x 8"
3/4" x 12"
1/2" x 16"
3/8" x 24"

127 mt
609 mm
25 mm x 203 mm
18 mm x 304 mm
12 mm x 406 mm
10 mm x 609 mm

Angle Shear 90°
Angle Shear 45°
(with Bar Shear)

6" x 6" x 1/2"
3" x 3" x 3/8"
4" x 4" x 1/2"

150 mm x 150 mm x 12 mm
75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm

Brake 12"
Brake 24"

80 ton
55 ton

72.50 mt
50 mt

Open End Brake

Max. 1/4" x 6" Flat or Angle Iron

6 mm x 150 mm

Pipe Notcher
Schedule 40

3/4"
1"
1-1/4"
1-1/2"
2"

19 mm
25 mm
32 mm
38 mm
50 mm

90° V-Notcher

6" x 6" x 5/16"

150 mm x 150 mm x 8 mm

Rectangle Notcher

3" x 5" x 3/8"
3" x 4" x 1/2"

75 mm x 125 mm x 10 mm
75 mm x 100 mm x 12 mm

V-Notch

3" x 3" x 3/8"

75 mm x 75 mm x 10 mm

Notching in Leg of Channel

6" to 10"

150 mm to 250 mm

Channel Shear

2" to 6" adj.

50 mm to 150 mm adj.

Rod Shear
Round Rod (Max.)
Square Rod (Max.)


1/4" to 1-1/4", 9 Cavity
1/4" to 1", 1 Cavity


6 mm to 32 mm
6 mm to 25 mm

Square Tube Shear

1/2" to 2"
12 gauge

12 mm to 55 mm
2.75 mm

Picket Tool

1/2"
3/4"
1"
16 gauge

12 mm
19 mm
25 mm
1.6 mm

Offset Die Holder

Max. 40 ton

Max. 36 mt

Strokes per minute in light material

1/4" stroke [Punch Station]

25 spm

Strokes per minute in heavy material

3/4" stroke [Punch Station]

17 spm

Hydraulics

3,500 psi

241 bar

Motor Standard

10 hp 3 ph
230/460
208/380/575

7.46 kW

Motor Optional

10 hp 1 ph
220v

7.46 kW

Dimensions

W-30"
L-65"
H-72 1/8"

76 cm
165 cm
183 cm

Weight

4,000 lbs.

1,814 kg

 

#DO 95/140-24M IRON WORKER Call for your Best Price
1-800-391-5419
 

 

Scotchman

Do 120/220-24

Standard Features

              Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity

*                    120 Ton Punch Station (1-1/2" in 1")

*                            Keyed Punch Ram for Safety

*                            12" Throat Depth

*                            Punch Gauging Table with Fence and Scale

*                            Die Holder Complete with 2" and 2-1/2" Die Inserts

*                            Forklift Accommodations

*                            Punch Nut with Wrench

*                            Adjustable Swing-Away Stripper

*                            One Round Punch & Die: Max. Dia. 1-1/4"

*                            Punch Jog Control

*                            Two Electric Remote Foot Pedals

*                            Two Adjustable Electric Stroke Controls with Scale

*                            Two 2-Stage Hydraulic Pumps

*                            Two Valves

*                            Angle Shear Capacity 6" x 6" x 1/2" at 90°

*                            Rectangle Notcher 3" x 5-3/4" x 1/2"

*                            Notcher Table with Guides

*                            200 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 12", 1/2" x 24")

*                            Shear Table with Miter Fence

*                            Tool Table Work Area

*                            Slug Receptacles

*                            Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations

*                            230/460 Volt /3 Phase Electrics (must specify voltage)

*                            All Guards Necessary to Comply with
ANSI B 11-5 Standards

*                            Forklift Accommodations

*                            Warranty: Three Years

*                            Made in USA

Capacities & Specifications

Rated on:

65,000 PSI Tensile

A 36 Mild Steel

Punching Capacity

120 ton
1-1/2" in 1"

108 mt
38 mm in 25 mm

Special Tooling

4" Max. Dia.

100 mm Max. Dia.

Throat Depth

12"

300 mm

Flat Bar Shear
(Sabre Blade - Std)

200 ton, 24" Length
1" x 12"
3/4" x 20"
1/2" x 24"

181 mt, 600 mm
25 mm x 300 mm
18 mm x 500 mm
12 mm x 600 mm

Angle Shear 90°

6" x 6" x 1/2"

150 mm x 150 mm x 12 mm

Angle Shear 45°
(with Bar Shear)

3" x 3" x 3/8"
4" x 4" x 1/2"

75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm

Brake 12"

75 ton

55 mt

Brake 24"

55 ton

40 mt

Open End Brake

Max. 1/4" x 6" Flat or Angle Iron

6 mm x 150 mm

Pipe Notcher Schedule 40 I.D.

3/4"
1"
1-1/4"
1-1/2"
2"

19 mm
25 mm
32 mm
38 mm
50 mm

90° V. Notcher

6" x 6" x 5/16"

150 mm x 150 mm x 8 mm


Rectangle Notcher

V.Notch

Notching in Leg of
Channel

3" x 5-3/4" x 1/2"

3" x 3" x 1/2"

6" to 10"


75 mm x 145 mm x 12 mm
75 mm x 75 mm x 12 mm
150 mm to 250 mm

Channel Shear

2" to 6" Adj.

50 mm to 150 mm

Rod Shear
Round Rod
Square Rod


1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav.


6 mm to 32 mm
6 mm to 25 mm

Square Tube Shear

1/2" to 2",
12 ga.

12 mm to 50 mm
2.75 mm

Picket Tool

1/2"
3/4"
1"
16 ga.

12 mm
19 mm
25 mm
1.6 mm

Offset Die Holder

Max. 40 ton

Max. 36 mt

Strokes Per Minute in Light Material

1/4" Stroke [Punch Station]

20 spm

Strokes Per Minute in Heavy Material

3/4" Stroke [Punch Station]

11 spm

Hydraulics

2,750 psi

189 bar

Motors Standard

10 hp 3 ph
230/460
208/380/575

7.46 kW

Motors Optional

10 hp 1 ph
230v

7.46 kW

Dimensions

W-34"
L-77.25"
H-74.25"

W-119 cm
L-174 cm
H-187 cm

Weight

6,000 lbs.

2,730 kg

 

#DO 120/200-24M Iron Worker Call for your Best Price
1-800-391-5419
 

Call for Shipping Quote

 

Scotchman

 

DO 150/240-24M

Standard Features

  • Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
  • 150 Ton Punch Station (1-7/8" in 1")
  • Keyed Punch Ram for Safety
  • 12" Throat Depth
  • Punch Gauging Table with Fence and Scale
  • Die Holders: 2", 2-1/2", and 3"
  • Punch Nut with Wrench
  • Adjustable Swing-Away Stripper
  • One Round Punch & Die: Max. Dia. 1-1/4"
  • Punch Jog Control
  • Two Electric Remote Foot Pedals
  • Two Adjustable Electric Stroke Controls with Scale
  • Two 2-Stage Hydraulic Pumps
  • Two Valves
  • Angle Shear Capacity 6" x 6" x 1/2" at 90°
  • Rectangle Notcher 3" x 5-3/4" x 1/2"
  • Notcher Table with Guides
  • 240 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 14", 3/4" x 24")
  • Shear Table with Miter Fence
  • Tool Table Work Area
  • Slug Receptacles
  • Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
  • 230/460 Volt /3 Phase Electrics (must specify voltage)
  • All Guards Necessary to Comply with
    ANSI B 11-5 Standards
  • Forklift Accommodations
  • Warranty: Three Years
  • Made in USA

 

#DO 150/240-24M Iron Worker Call for your Best Price
1-800-391-5419
 

 

  • Punching Capacity 45 Tons

  • Supplied with 3-in-1 Combination Tool Angle Shear, Flat Bar Shear and Rod Shear

  • Keyed Punch Ram for Safety

  • 4.25" Throat Depth

  • Angle Shear Capacity, 3" x 3" x 5/16" at 90 Degrees and 2" x 2" x 1/4" at 45 Degrees

  • Bar Shear Capacity - 3/8" x 6"

  • Tool Table Work Area for Mounting Optional Tooling

  • 2" Die Holder, Jam Nut, and Stripper

  • Jam Nut Wrench

  • Adjustable Electric Stroke Control

  • 110 Volt 1 Phase Electric

Call for Extra Available Tooling

#2530 Porta Fab-45 Tooling Package
  • 8" Brake

  • Work Light

  • Slug Tray

  • Back Stop w/ Scale

  • 12 Sets Round Punches and Dies

Call for your Best Price
1-800-391-5419

Until June 12, 2010

$5,300.00

 

  • Punching Capacity 50 Tons

  • Keyed Punch Ram for Safety

  • 3 Station Revolving Turret

  • 4" Throat Depth

  • Angle Shear Capacity - 4" x 4" x 3/8" and 2" x 2" x 1/4" at 45 Degrees

  • Bar Shear Capacity 14"

  • Blades Complete with 4 Cutting Edges

  • Built in Notcher 2.5" x 3" x 5/16"

  • Tool Table Work Area for Mounting Optional Tooling

  • Three 2" Die Holders, Three Jam Nuts, and Three Strippers

  • Jam Nut Wrench

  • Adjustable Stroke Control

  • 230/460 Volt 3 Phase Electric (must specify voltage)

Part # Description Price
#WF5014-TM Turret 5014-TM Call for your Best Price

1-800-391-5419

#2878 Tooling Package
  • 8" Brake

  • Work Light

  • Slug Tray

  • Back Stop w/ Scale

  • 12 Sets Round Punches and Dies

Call for your Best Price
1-800-391-5419

Model 5014-CM

  • Punching Capacity 50 Tons

  • 6" Throat Depth

  • Angle Shear Capacity - 4" x 4" x 3/8"

  • Bar Shear Capacity 14" x 3/16"  -  4" x 3/4"

  • Adjustable Stroke Control

  • 230/460 Volt 3 Phase Electric (must specify voltage)

Call for Price


use this Link to order a FREE Catalog.

xml_icon