Turbo Burr

Woodward Fab Heck Industries Turbo-Burr

• Turbo-Burr
• Model R
• Easily brought to the worksite
• For use as both a hand and bench tool
• Puts a safety edge on sheet metal in on pass
• Breaks sharp edges on parts at mill, saw, or shear

Specification :

Rotation………….55,000 RPM (no load speed)
Air Consumption……….5 to 11 CFM-lubrication not needed.
Air Pressure………….60 to 120 PSI
Air Hose……………..1/4″
Burr type: 1/4″ diameter x 2″ length overall-solid carbide.
Depth of bevel………..0 to .075″ at 45°
Feed speeds:………….Up to 2″ per second
Weight……………….3.5 lbs. (1.6kg)

Woodward Fab Heck Industries Turbo-Burr

• Turbo-Burr
• Model S
• Easily brought to the worksite
• For use as both a hand and bench tool
• Puts a safety edge on sheet metal in on pass
• Breaks sharp edges on parts at mill, saw, or shear

Specifications

• Bevel depth range – 0″ to .075″
• Bevel angle – 45 degrees
• Minimum material thickness – 0.015″
• Rotation speed – 55,000 rpm (no load speed)
• Air consumption – 5 to 11 cfm (lubrication not needed)
• Air pressure requirement – 60 to 120 psi
• Air hose diameter required – 1/4″
• Collet – 1/4″ compression type
• Power – Pneumatic
• Weight – 3.5 lb. (1.6 kg)