Safety considerations for auto body hand tools

The auto repair can be done using two types of tools – the power tools and hand tools. The powered tools are often used for welding, spray painting, grinding, etc. Whereas the hand tools are used for dent repair, tightening, repairing bruises, and punctures. The common auto body hand tools are chisels, screwdrivers, hammers, wedges, etc. The use of these hand tools is quite easy but if used incorrectly or carelessly, it can cause serious injury to the operator. However, there are some tactics that the operator can adopt to use auto hand tools safely and efficiently. Do you know these tactics? If you intend to know, then this post discusses safety considerations for auto body hand tools utilization for you.

Hammers

The following are some safety considerations for auto body hand tools utilization that every operator must follow.

Select an appropriate tool: You can perform multiple tasks by using the same tool but it certainly does not make a safe choice many times. Using an inappropriate tool might make your task quickly in certain ways but it can increase chances of injury. For example, many automakers use a chisel instead of a screwdriver. It might require less power to screw-in but it increases chances of slip and injury. Look for the tool with the correct size, correct grip, and specific functionality. For example, for electrical work, go for insulated tools, for heavy load or leverage work, go for long-handled tools.

Wear appropriate personal protection equipment (PPE): Ensure that you wear eye protection glasses, gloves, and aprons, to avoid any cuts and bruises. Select the correct type of gloves. There are several types of gloves suitable for different requirements. For example, fabric gloves protect against dust and oil, whereas aluminized and aramid fiber gloves are suited for high-temperature tasks.

Maintain Your Tools: Tool maintenance is an essential safety consideration. In most cases, worn out, defective tools cause injuries. Therefore, the operator must maintain the tools properly. The following steps can help in tool maintenance.

Sharpen the cutting equipment.
Check wooden handles for cracks and fill up the cracks before use.
Oil the metal tools to protect from rusting, and any other chemical reaction.
Check the surface angles and tip alignments of the tools before use.

Use the Tools Correctly: Each tool is designed for a specific manner of utilization. For example, the screw-drivers are designed for lock and twist functionality, it has to be used this way only to tighten or loosen the screw. Therefore, different tools must be used in a manner they are designed for in order to ensure auto body hand tools safety. The following are directions to use specific auto body hand tools.

Cutting tools: Use the cutting tools like nibblers, hand shears, etc, at 90 degrees i.e. parallel to the surface.
Hammers: Strike the hammers straight on the surface. Use the wrist movement instead of shoulder movement to forge at a specific location at a specific angle.
Screwdrivers: Grip the screw-driver firmly and twist slowly clockwise or anti-clockwise, depending on the operation. Ensure that the size of the screw-driver is correct and its tip locks well in the screw notch.
Chisels and Files: Make use of the tip of a chisel and middle flat body of a file to perform a safe task. Never hold the chisel or file on the working surface, as small metal granules on these surfaces can produce sharp cuts.
Spanners: Choose spanners of correct diameters and side fit. Lock the spanners properly before sinning to avoid slip and hit injury. Prefer spanners with rubber grips to get a firm hold of the tool.

Along with the following above mentioned safety consideration for auto body hand tools use, one must utilize quality tools. Quality assures reliable and durable function of the auto body tools. Therefore, you must buy them from trusted suppliers like Woodward-Fab. The company is a prominent supplier of premium quality auto body hand tools. One can buy a wide range of auto body hand tools like hammerd and mallets, shrinking hammer, forming dollies, nibblers, spanners, forging hammers, and many more.

Browse the best selling Hammers, Mallets and Dollies:

PRODUCT	SKU
Hammer and Dolly Kit	WFHAMMERD
Shrinking Hammer	WFSHRINKH
Wood Shaping Bossing Mallet	WFWBOS
Nylon Bossing Mallets	WFBOSSMAL
2″ x 4″ 17 Ounce Barrel Mallet	MFM17
Slapper Set	WFSL-SET
Finger Dolly	DOLLY FINGER
T-Dolly Set	WFDOLLYSET
Curved T-Dolly	WFDOLLYC.5
Tapered T-Dolly	WFDOLLYT5.7
Tank Shaped Forming Head Dolly	WFDOLLYTANK

How to Use Your Auto Body Hand Tools More Safely?

Browse the best selling Hammers, Mallets and Dollies:

Related Post: