Sheet metal fabrication is one of the most widely carried out manufacturing process, today. It is basically the process of shaping a sheet metal to get the desired part. This is done by removing the material or deforming it. Sheet metal is a special type of material with extreme flexibility. It can be bent, cut, or stretched to form different shapes. In order to do this, a wide range of machines are used, and different techniques are implemented. Are you interested to know what these machines and techniques are? If so, then read the following post, which explains in detail, all the different types of machines and techniques used for sheet metal fabrication.
What are the Different Machines Used for Sheet Metal Fabrication?
To fabricate a sheet metal into desired shape, different machines are required, which are specially designed for the job. Here are some most commonly used machines for sheet metal fabrication:
- Hydraulic Press Brakes
- Swing-beam Shears
- Ironworkers
- Plate Rolls
- Profile Rolls
- Horizontal Band Saws
- Folders & Benders
- Formits
What are the Various Sheet Metal Fabrication Techniques?
There are various techniques that can be implemented to fabricate a sheet metal. The selection of the technique depends on the parts to be manufactured. The following are some common techniques:
- Bending: Sheet metal bending can be achieved in two ways:
- Metal Brake:
In this method, the metal is placed on a flat surface. A flat bar is then clamped on the metal. The gated portion of the metal is then lifted and bent slowly, until the desired angle is achieved. Precise bends can be achieved by metal brakes.
- Form Bending:
The metal is kept over a shape, or edge and bent. A hammer or dolly is then used around the metal to give it a desired shape.
- Cutting:
In order to create a part of desired shape, the sheet metal is required to be cut. If the amount of sheet metal to be cut is small, then it is done using hand shears. On the other hand, if large volume is to be cut, then advanced shear machines are employed to do the job.
- Shrinking:
This technique is further classified into three types, which are:
- Heat Shrinking:
In this method, an overstretched area of metal is heated at high temperature until it gets red hot. As the metal cools, it shrinks.
- Tucking Metal:
As the name suggests, in this method, the metal is forced in a crevice, and bunched by hammer. A tucking fork is used to fold the metal over the edges.
- Shrinker:
This is a tool featuring moving jaws that are textured. The sheet metal is grasped by the jaws and then forced it tightly together. This reduces the marring on the metal.
- Stretching:
In this technique, the sheet metal is stretched and bent simultaneously on a die. This helps in forming large contoured parts from the metal. This technique can be carried out using any of the following:
- English Wheel
- Hammer and Dolly
- Stretcher
- Metal Fusion:
As the name suggests, this technique is used to join different metal pieces together to form an end product. It is done with the help of welding the pieces of metal. Metal fusion is further classified into metal riveting, TIG welding, MIG welding, Oxy Acetylene Welding, and so on.
Now that you have got a clear picture of the machines used and techniques implemented in sheet metal fabrication process, it will be easier for you to understand which machines to purchase and what techniques to implement. However, it is advisable to source these machines, and avail the fabrication services from well-known, experienced, and trusted manufacturers, and service providers. Woodward Fab is one such leading, and trusted manufacturer of sheet metal fabrication machines of highest industry standards.